arlo | Arlo Camera Setup | Arlo Pro 2 Setup and Support | Contact - +1 8059605287

When you  square measure   fixing  or adding  a replacement  Arlo wire-free camera to your system, a camera  may   sometimes  fail to synchronize (sync)  together with your  SmartHub or base station. An Arlo camera   can't be   detected by your system   till   it's   with success   synced. Review these common remedies to troubleshoot the issue.  For more informations , visit  www.arlocamerasetups.com  or Contact - +1 805 960 5287 Correctly sync the base station to the camera Keep the camera close to the SmartHub or base station: Make sure that the camera you are trying to sync is no more than three feet away from the base station during the sync process. The sync process does not work if the camera is too far away from the base station when you press and release the Sync button. Follow these steps, and refer to the status LED(s): 1. If you're using a single-LED SmartHub or base...

These  directions  apply to  fixing  Arlo Wire-Free cameras with  each  Arlo base stations and Arlo  professional  base stations. For more informations , please visit  www.arlocamerasetups.com If you  synchronize  Arlo Wire-Free cameras with  AN  Arlo  professional  base station, the Arlo Wire-Free cameras  will  access the Arlo  professional  base station's features: the siren  and also the  USB local backup storage option. To set up and sync Arlo Wire-Free cameras: 1. Unlock the battery compartment by sliding and holding the latch. 2. Slide the battery door back and lift it to open the compartment. 3. Insert the batteries as shown and close the battery door. 4 .Bring the camera  at intervals  one  to 3  feet (30 to  a hundred  centimeters) of  the bottom  station. 5. Sync the camera to the base station: a. If you ar...